INTRODUCTION:
This tutorial we will make a 5v converter, it can convert (10 -24)v input to 5v output.
PARTS REQUIRED:
- Let's have a look at the pin configuration of 7805 IC.
- Connect the 7805 IC in the Veroboard.
- Now connect 470uf and one 0.1uf capacitor parallelly with pin 1,2.
- Now similarly connect 220uf, 0.1uf capacitor parallay with pin 2,3 as connected in the diagram below.
.png)
Recent Comments
Sweety
2017-08-19Aswm Project Sir..
Sa
2017-08-19Thanks Mam
Vantra
2017-11-16Can I use 220 ohm or 100ohm resistor? And can I use 470uf 16v capacitor?
Plenty
2018-08-06What about using 333 ohm resistor with your 893 uf charly, alpha go, bojack
Riya
2017-12-23Nice Post Sir...
Sai Tat Sat Mishra
2017-12-23Thanks Mam For Your Support & comment
Mayank Sonu
2018-04-21My doubt is what is the reason for connecting those capacitors in both input and output terminals? The link of Project.
Michaels
2018-05-05How about when im using 9v input?
Arif
2018-06-10I want the diagram of step-down DC 12v circuit up to 1v 2amp in variable
Luiz Jr
2018-08-105V done. I need 5V 2amp. You can help upgrade to 2 or 3amp?
Sai Tat Sat Mishra
2018-08-10Sir thanks for your comment.we will definitly upgrade that one.
Mh
2019-01-04V. Nice
Da
2019-02-11Sir ? Whats the output Ampere for that ?
Sai Tat Sat Mishra
2019-02-111.5A
Da
2019-02-11Thanks. Is it okay to make this to power arduino ?
Da
2019-02-11Thanks, I make it ðŸ‘
nafeel
2019-04-03What about the output current rate?
ABELARDO
2019-04-28FROM MEXICO, TKS.
Pat from Ireland
2020-01-19Nice video....what components should be used to convert 24volt to 12 volt?